One Drag Two Flat Mask Machine
This machine is mainly used for the automaticformation of flat masks: the entire roll of fabric is driven by rollers after unwinding, and the fabric isautomatically folded and hemmed; the entire length of the nose bridge is pulled andunrolled, cut to length and imported into the hemmed fabric, bilaterally Ultrasonic welding to the seal, thenultrasonic side sealing,cutting with a cutter: the mask is conveyed to the two mask earbandwelding stations through an assembly line, and the final mask is formed by ultrasonicwelding. When the mask is made, it passesthe assembly line. Conveyed to flat belt line for collection.
1. Applicable specifications
Item |
No. of hanging shafts |
Width (mm) |
Outside dia. of coil (mm) |
Inside dia. of material (mm) |
Weight |
Non-woven meltblown cloth |
3 |
170-200 |
φ600 |
φ76.2 |
Max15kg |
Nose bridge steel wire covered plastic / pure steel wire / full plastic |
1 |
3-7 |
φ400 |
φ76.2 |
Max25kg |
Earband |
2pkgs |
160*3 |
|
|
10N |
2.Specifications of production masks:
Standard type: 175 *95mm (mask specifications)
Product Information
Technical Details
Technical Data
◆Themain components of the equipment
No. |
Name |
Q’ty |
Note |
1 |
filter cloth / filter cotton / absorbent layer water release device |
3 sets |
up to 4 sets, random 3 sets |
2 |
Nose bridge strip unwinding device |
1set |
|
3 |
nose bridge straightening device |
1set |
width 3-7mm |
4 |
Nose bridge strip driving and cutting device |
1set |
Width 3-7mm |
5 |
Cloth folding device |
1set |
|
7 |
cloth driving device |
1set |
|
8 |
cloth fan folding device |
1set |
|
10 |
roll-sealing device |
1set |
|
11 |
Shunting device (slicing machine) |
1set |
Suitable for T0PKZ-90 full-automatic flat mouth machine, it will not be delivered during emergency delivery, and it can be added later |
12 |
ear band welding machine device |
2 set |
|
13 |
Unloading conveying device |
2 set |
|
14 |
operation panel |
1set |
|
Note:
1) All products are our standard products, designand specification are subject to change without priornotice.
Additional Information
◆ Dimenstions
◆ Equipment installation and configuration requirements
(1)Equipment size: 7000mm(L)×4000mm(L)×2000mm(H)
(2)Equipment weight: ≤1500kg, ground bearing capacity> 300KG / e
(3)Working power: 220KVA, 50z
(4)Compressed air: 0.5"0.7MPa, using flow rate of about 300L /min
(5)Peratingenvironment: temperature 1035 ℃, humidity 5-35% HR, no flammable, corrosivegas, no powder (cleanliness no lessthan 100,000).
◆ Installation and Charges:(2 Options)
1) The seller will send engineers stay in 20 daysfor commissioning.
The relevant chargessuch as salaryUS$100/person/day,visa and round way air-tickets will be borne by Buyer.
2) The engineer guide to trail and test by video;before dispath, Machine will be finished testing and trail.